Installation - Husky H4220 Guía De Uso Y Cuidado

Installation

1
Cleaning the air hose
□ A 3/8" air hose is required, with a maximum length of 25 ft.
□ Clean the air hose of accumulated dust and moisture
before connecting it to the air supply.
NOTE: If a longer air hose is required, connect a 1/2" air
hose to the 3/8" air hose to ensure the die grinder has the
necessary air supply.
2
Connecting to the air supply
□ Always use clean dry air. Excessive moisture and dirt will
greatly reduce the life of any air motor. We recommend the
to the tool as possible.
□
secured tightly.
Recommended Air Line Set-Up
Part Description
A 1/4" Die Grinder
B Quick Plug
C Quick Coupler
D Air Hose
E In-line Regulator
F In-line Lubricator
G In-line Filter
H Air Compressor
5
Please contact 1-888-43-HUSKY for further assistance.
HUSKYTOOLS.COM