Victor SMART-KILL Manual Del Usuario página 9

8
10. Monitor Trap
Stay up to date on trap activity from anywhere via your mobile device.
1. Download the free Victor
store. Check that the unit is turned "OFF" by making sure the power button is not pressed
down. Insert batteries into the battery compartment and launch the Victor
2.
Connect your trap by following the instructions on screen. Step by step instructions are
also in this guide.
3.
Once the power button and Wi-Fi button have been pressed during the initial setup, users
will have 5 minutes to successfully finish. Once 5 minutes have passed, the user should
power the trap off and start over if setup was not successful.
Important Note: Some screens, instructions and settings may differ slightly depending
on what device you are using.
1. Press Power Button
Press the power button to turn the trap on. The Victor
2. Press and Hold Wi-Fi Button for 5 Seconds
The Wi-Fi button will blink blue 10 times while the trap is connecting.
1
Getting Started: iOS Devices
Pest App from the Apple App Store
®
iOS Devices
9
or Android Google Play™
®
"V" will blink green 3 times.
®
2
9
Pest App
®