Customer Service - Klein Tools ET160 Manual De Instrucciones

ENGLISH
BATTERY REPLACEMENT
When the LOW alert
same time, the batteries must be replaced.
1. Loosen screw and remove
battery door
2. Remove battery cartridge
from battery compartment.
Note orientation.
3. Remove and recycle
4 spent AAA batteries.
4. Install 4 new AAA batteries into
cartridge, noting proper polarity.
5. Place battery cartridge back into the
battery compartment, aligning the
leads (fits only one way).
6. Replace battery door and tighten screw securely.
SENSOR SERVICING
When ALL lights on the tester
sensor has failed and the unit must be serviced. Contact Klein Tools
3
at 1-800-553-4676 or customerservice@kleintools.com for further
details. There are no user-serviceable parts inside tester.
Be sure tester is turned off and wipe with a clean, dry lint-free
cloth. Do not use abrasive cleaners or solvents.
Remove the batteries when the tester is not in use for a prolonged
period of time. Do not expose to high temperatures or humidity.
After a period of storage in extreme conditions exceeding the limits
mentioned in the General Specifications section, allow the tester to
return to normal operating conditions before using.
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with
local regulations. Please see www.epa.gov or
www.erecycle.org for additional information.
450 Bond Street Lincolnshire, IL 60069 1-800-553-4676
customerservice@kleintools.com
6
MAINTENANCE
and HIGH alert
5
.
15
16
CLEANING
STORAGE
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE

CUSTOMER SERVICE

KLEIN TOOLS, INC.
lights are illuminated at the
6
15
4 , 5 , 6 , 7
www.kleintools.com
, 9 are illuminated, the
16