Autopilot APCET2 Manual De Instrucciones página 3

Q&A
Can I connect more than one device to the unit?
Yes, as long as the total amperage of the devices connected to the unit do not exceed the maximum
rating of the unit. We recommend the total amps not to exceed 75% of the rating.
The temperature of the area does not seem to be correct. Whats wrong?
Ensure that the remote temperature sensor is not being affected by other factors such as direct
sunlight exposure, or areas that may not have good air movement.
What if there is no power?
Confirm that the unit is getting power. Check the device that is connected to the unit by plugging it
directly into a known power supply. If the unit will not turn on and no LEDs will illuminate, contact
your retailer for repair and warranty issues.
Temperature control range
Separate Day & Night settings
INSTRUCTIONS
SPECIFICATIONS
Input voltage
Maximum amperage
Temperature deadband
(hysteresis)
Weight
Dimensions
Probe length
120 VAC
15A @ 120V
50° to 100°F
Photocell controlled
3°F
<1 lb
2.25" x 2.25" x 4.55"
20'
3