Power Button Usage; Touch-Screen Navigation; Disk - Genesis GT-8320 Manual Del Usuario

2 POWER BUTTON USAGE

Turn On: Press the power button and hold for 2 seconds.
Turn Off: Press the power button and hold for 2 seconds →Tap Power off→tap
OK.
Reboot: Press the power button and hold for 2 seconds →Tap restart→tap OK.
Airplane mode: Press the power button and hold for 2 seconds →Tap Airplane
mode.
Silent mode: Press the power button and hold for 2 seconds →Tap Silent
mode.
Force Off: If device does not respond, press and hold the power button for 5
seconds.
(Warning: Force off could lead to unpredictable system errors!)
Reset: Press the reset button could be reset the device. It's will clear the all data,
Please careful with the function.
☆
After the current reset function can't restart, can only be turned off, so you
need to press the power button restart the device after reset.

3 TOUCH-SCREEN NAVIGATION

The touch-screen allows for quick, easy and convenient navigation for all
applications.
Refer to the following method to operate the touch screen by the finger pulp:
Tap: Quick tap & release on an item on the screen.
Touch & hold: Touch and hold in place approx 2 seconds, and then release to
display an options window.
Finger slide: Touch & slide your finger across the screen and then release.
Two points to zoom in or out: Press and hold any two points relative or
opposite direction to drag in desktop, video play interface, picture view interface
and so on .it will zoom in or out the interface.
☆
To avoid scratching or crushing, do not place objects on the touch screen
surface.
4 U-Disk
Insert U-Disk
Insert your U-disk into the device via USB host transfer cable. When ready for
use, enter into the file browser, switch to the USB folder to view it.
Remove U-Disk
Close all applications or documents which have been opened on the U-disk.
→ Settings →Storage →USB storage → Unmount this storage
Tap
device. When it displayed Mount this device and then you can unplug the
U-disk.
4