Steren CLK-910 Guia De Inicio Rapido

Before using your new Steren Fingerprint time attendance control,
please read this quick guide to prevent any damage. Put it away in a
safe place for future referen
CONTROLS
1. Keypad
2. On / Off key
Keep pressed to turn on / turn off the
device.
3. OK Key
Press to confirm an option on the
menu.
4. ESC key
Use to return one step.
5. MENU key
Press to enter the menu.
INSTALLATION
5. Plug the power cord to
receiver and to an outlet.
6. To activate press and
hold the ON/OFF key.
REGISTRATION
To add a new user, access to the menu pressing the "MENU" key and select the
"Enroll" submenu pressing "OK". The next list explains the properties of each option,
choose an option according with your necessities.
1. Enroll (registration)
This menu is used to add a user.
- Level Selection
• User Enroll: You can add a new user.
• Manager Unroll: On the device, you can
configure a special user which has Management
rights to change the device's setting.
6. Keys ▲▼
Use to scroll through menu items.
7. Reader of Fingerprint and TFID
target
8. Power input
9. Ethernet port
10. Port USB
11. Port for SD card
1.- Locate the place where you want to
install the CLK-910.
2.- Mark the 3 points where you will drill.
3.- Insert the 3 peds in the holes and
place the 3 screws (but do not tighten them
completely).
4.- Hang the CKL-910 on them.
1 2 3 ESC
MENU
4 5 6
9
7 8
0 OK
INPUT
POWER ADAPTER
3 ESC
1 2
6 MENU
4 5
8 9
7
OK
0
To add or edit a user you have different options:
1. Finger: Added a user identified by their fingerprint.
2. Password: You can identify the user through a Pasword (key).
3. Card: The user can access through a card.
When you register a new user using his or her fingerprint, the device will ask to
place the finger over the sensor three times to ensure a correct reading.
OPERATION
Once a user is registered, simply place the finger on the
Fingerprint reader for 2 seconds, pass a card or enter
the assigned password.
The entry and exit records are automatically generated.
The green LED (on the top of the CLK) turn on when the
detection of the finger is correct.
SPECIFICATIONS
Input: 9V - - - 1A
Voltage converter:
Input: 100-240 V~ 50/60Hz 300mA
Output: 9V - - - 1A
Before using your new Electronic insect killer, please read this
Product design and specifications are subject to change
instruction manual to prevent any damage. Put it away in a
without previous notice.
Product: Fingerprint time attendance control
Part number: CLK-910
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase
ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling,
leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center. Call Center
01 800 500 9000