Functions
Notifications for incoming calls / messages
1. Press
and then
2. Change to Enable notifications and configure the notification
period.
3. When the product is connected with the smartphone and the Silver-
Crest SAT 70 Activity Tracker App is running in the background, the
product will vibrate and the LED display
ceive an incoming call or message during the designated notification
period.
Smart Alarm
1. First press
and then
2. Press Add Alarm. Configure the alarm settings and then click Save.
3. The product will vibrate at the scheduled alarm time.
Note: to delete the alarm, go into the alarm settings and press
Remove.
Activity monitor and sleep data
The product shows your movements and sleep data in real time. To moni-
tor your movements, press
Then swipe left or right to see your data.
8
US-EN
286943_silv_Aktivitaetstracker_DIN4_content_US.indd 8
> Incoming calls / Incoming messages.
1
will blink blue if you re-
to select the smart alarm.
and swipe down to synchronize your data.
Share activity data
1. Press Share to retrieve the share tab.
2. Select a network where you want to share the data and follow the
instructions on the display.
Measure UV radiation
to select UV monitoring . Make sure that
Press
and then
you have chosen the correct strap.
1. Open the SilverCrest SAT 70 Activity Tracker App. Swipe left for the
UV sensor view.
2. Place the product in the sun and press Test. After a few seconds the
UV radiation will be shown in the display.
3. To see more detailed statistics, press the UV radiation circle.
Find my band
18.10.17 15:14