Forch 5404 1 Manual De Instrucciones página 7

Construction Helmet
ENG
Application:
This protective helmet is conceived to protect your head from falling objects on production or
construction sites.
fixing holes on the sides for use with hearing or facial protection.
■
with adjustable headband
■
easy to use
■
Adjustment:
by turning the adjustment wheel the helmet can be adjusted to the head size
■
the chin strap can be assembled using the fixing holes on the sides
■
Regulations:
This protective helmet corresponds to the requirements of the European Directive 89/868/
EEC BS EN 397:2012.
Cleaning:
do not use any rubbing cleaners or solvents
■
clean the parts of this protective helmet with warm soap water and dry with a soft cloth.
■
You might use a mild disinfectant if necessary.
Storage:
store protective helmet in a clean and dry place (5 - 40 °C)
■
avoid direct sunlight
■
Suitable accessories:
please only use original accessories from the manufacturer
■
Use:
check regularly for damages
■
if the outer skin is damaged or had been exposed to strong impact or shock, the helmet
■
must be replaced
the maximum service life for this helmet is limited to 4 years from the date of manufacture
■
see inside
Suitable packaging for transport:
During transport the helmet should be protected against physical or chemical damages by
using an adequate packaging.
Place named:
INSPEC International
56 Leslie Hough Way Salford
Greater Manchester M6 6AJ
United Kingdom (0194)