DigiPower DP-PBA6L Manual Del Usuario

3 IN 1 WIRELESS
POWER BANK
User Manual
DP-PBA6L
OPERATION OF THE POWERBANK
CHECKING THE POWER LEVEL
• To check the power level press the function
button one time
• There are 4 blue LEDs in total: 4 blue LEDs >
75% charge, 3 blue LEDs 50% to 75% charge,
2 blue LEDs 25% to 50% charge,
1 blue LED < 25% charge
TURNING THE POWERBANK OFF
(Turning the LEDs off)
• Press and hold the function button for 5 seconds
to turn the powerbank and the LEDs off
CHARGING THE APPLE WATCH
• Place the watch on the charge area and press
the function button to start charging
• The LEDs will remain on if the watch is charging
CHARGING THE AIRPODS
• Insert the Airpods into the compartment on the top
of the powerbank
• The blue power level LEDs and the green watch
charging LED will light up to indicate the Airpods
are charging
• When the Airpods are fully charged all the LEDs
will turn off
CHARGING A SMARTPHONE OR OTHER USB
DEVICE
• Connect a USB cable to the powerbank and the
other end to your device
• Press the function button one time to turn the
powerbank on
• The blue power level LEDs will remain on while
your device is charging
RECHARGING THE POWERBANK
• Connect the powerbank to a USB power source,
the blue LEDs will light up in sequence
• When all 4 blue LEDs remain lit the powerbank
is fully charged
Product diagram
Specifications
Experiencing problems?
Stop
Before returning this product please call our
toll free customer support line for assistance:
1-800-838-3200
or email us at TechSupport@Mizco.com