Publicidad
This machine is not suitable for minors
to use or food processing.
This machine could transfer photos, words
on cotton, fiber, metal, ceramic, glass etc.
suitable for producing gift, advertisement
Technical Parameters:
Machine Type: Pneumatic Heat Press Application: T-
shirt, Puzzle, Towel, etc.
Voltage: 110V/220V
Power: 1.4kW, 2.2kW
Time Range: 0~999 sec.
Max. Temp.: 232°C (450°F)
Heating Element:75*105CM/ 80*100CM
G.W: 340KG
Usage
1. Connect with power plug, turn on power switch, the indicator light works, then you can set your desired right temp and time.
2. After set, the machine will heat up(200℃ about 15 minutes)
3. Raising up handle, place printing materials on working table, try for a right pressure.
4. When machine reaches the set temp, then place the printing materials on working table, press down the Start Button, , when
reaching the set time, the machine sounds, then lift up the handle and take out the printing materials.
5. You can also use Manual/ Auto to save time. For Emergency incident, Please use Emergency Stop
①
⑩
Pneumatic Heat Press Machine FJXHB5
⑧
③
②
⑨
⑥
⑦
1
Air treatment
1
② Power Switch
④
③ 3IN1 Controller
④ Heat Plate
⑤ Pad
⑥ Under Plate
⑦ Drawer
⑧ Pressure Knob
⑨ Emergency Stop
⑤
Publicidad
