Assembly - Husky HOTC6212B11M Guía De Uso Y Mantenimiento

Assembly

1
Attaching the side handle
□ Attach the side handle (B) to the cabinet using four bolts
(DD).
□
Tighten all bolts with the 10 mm wrench (EE).
Do not over tighten the bolts to avoid damage to the finish.
NOTE: The holes in the cabinet are tapped and do not
require nuts.
3
Installing the drawer liners
□ Place the drawer liners (K) in appropriately-sized drawers
to protect the surface.
K
□
B
DD
2
Attaching the power strip brackets
□ Attach the power strip brackets (H) to the cabinet using four
bolts (AA).
□
Tighten all bolts using a screwdriver.
Do not over tighten the bolts to avoid damage to the finish.
NOTE: The holes in the cabinet are tapped and do not
require nuts.
EE
4
Installing the side tray
□ Attach the side tray (L) to the cabinet using three bolts (BB)
and one nut (CC) to each bracket (Q&R).
□ Tighten all bolts using a screwdriver.
Do not over tighten the bolts to avoid damage to the finish.
Q
BB
CC
6 6
□
R
L
H AA