LOTRONIC Madison MAD-CD10 Manual De Instrucciones página 7

•
WMA Audio :
Windows media file
o
File extension : .WMA
o
Transfer Bit Rate : 8kbps ~ 320kbps
o
Incompatible file types created in Windows Media Player 9 or later are not compatibles :
o



Basic operation steps :
•
Press ON on the CD player front panel to turn the system on.
•
While in any input mode, insert a compatible USB flash memory drive into the USB input on the front panel of the
CD Player section. To select USB playback mode, press the USB input on the remote control or front panel.
To play an audio track:
•
Press the Play button () on the remote control or front panel and the CD will begin playing from track 1 of the
USB stick.
To pause playback :
•
Press the Pause button () on the remote control or front panel and the track will pause.
•
Press the Play () again to resume playback of the track for the same position from where it was paused.
To stop Playback :
•
Press the Stop button (
() will resume playback from the beginning (track1) of the USB stick.
To play a desired track:
•
During playback, press the backward/forward skip buttons (/) button on the front panel, or Channel/Track "+"
or "-" buttons on the remote control.
•
Press one of the numeric buttons (1 ~ 9) on the remote control to directly access your desired track.
To select a particular part of a track:
•
During playback, press and hold the FWD button (
current track to the desired part.
To remove the USB memory stick:
•
Press the Stop button (
the USB stick from the front panel USB input.
Connecting to an external Amplifier or Receiver from the Line Out :
This system has a L/R stereo RCA line output on the rear panel of the CD player section. It is compatible with the line input
RCA jacks on any common home amplifier or receiver sound system.
Basic operation steps :
•
Connect a pair of RCA stereo cables from the line input jacks of your home audio amplifier or receiver to the red
and white « LINE OUT » jacks on the rear panel of the CD player section of this system.
•
You can now select either the CD player or USB Inputs as your desired output source only, however the volume
will now be controlled by your external home amplifier or receiver. Follow your manufacturer's instructions for
further information on the use of this setup.
©Copyright LOTRONIC 2015
WMA Professional
WMA Lossless
WMA Voice
) on the remote control or front panel and the track will stop. Pressing the Play button
) on the remote control or front panel and the track will stop. Then it is safe to remove
) or RWD button (
MAD-CD10
) on the remote control to scan the
6