The First Years Y4572 Manual De Instrucciones página 3

4. Remove the built-in 45ml-measuring cup from the top of the drying
rack and fill with water. Fill cup twice with FRESH, COLD WATER and
pour ONTO HEATING PLATE ONLY.
It is IMPORTANT that you DO NOT EXCEED this volume of water.
Hard water may increase residue build up on the heating plate.
If you have hard water, it is advisable to use filtered water.
5. Place the BOTTLE CHAMBER on
the sterilizer base.
6. If sterilizing bottles and their
accessories: place the bottle
rack in the bottom position of
the drying rack and leave the
large accessory tray in the top
position. (See A).
If sterilizing pump parts and
additional small items: remove
the bottle rack and replace with
an accessory tray. (See B).
If sterilizing small toys and
pacifiers: push up bottom
accessory tray to middle
position on the drying rack and
add third accessory tray to
bottom position. (See C).
7. When sterilizing bottles, place
the bottles UPSIDE DOWN
onto the bottle rack posts.
Placing bottle upside down
will allow the steam to enter
bottle freely.
X 2
A
B
3