Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 7
STEP 7
(1) Attach the door (7) to right side panel (3) by inserting 4 screws (F) through the holes on the metal
hinge then tighten to right side panel (3).
STEP 8
STEP 8
(1) Place the template with drill hole position on the wall that you desire to hang the cabinet.
(2) Drill 2 holes through the hole position on the template.
(3) Insert 2 plastic anchors (L) into the holes.
(4) Attach the cabinet in place with holes, then insert 2 long screws (M) through the holes on the back of
cabinet and tighten the cabinet to the wall.
Publicidad
Tabla de contenido
