Before using your new Electronic insect killer, please read
Before using your new Hot air gun, please read this
this instruction manual to prevent any damage. Put it away
instruction manual to prevent any damage.
•
This equipment is for industry use only.
•
Do not use the equipment near to flammable liquids or in
atmospheres with gas.
•
If the power cord is broken DO NOT use the equipment and
turn to with an authorized dealer.
•
Do not try to open the equipment, may cause malfunction and
warranty repeal.
•
Do not try to open the equipment, otherwise you can be
exposed to dangerous voltage.
•
Do not expose to extreme temperatures.
•
Do not use or store the equipment near wet places. May
cause malfunction or shock hazard.
•
Clean with a soft, dry cloth.
•
3-way selector switch
•
Continuously variable temperature from 100 to 500°C
•
Overheating protection
•
1200W power output
•
Continuously variable air flow from 200 to 450 l/min
•
170cm cable length
APPLICATIONS
- Ideal to contract thermo-fit tube
- To dry some kind of glue and curing of chemical substances or
epoxy resins
- To mold or bend some kind of plastics or pastes
HOW TO USE
1.- Unpack the equipment carefully, then check that all the
accessories are included in the package. Also, make a review of
the power cords and all the equipment to know if they don't have
any visible damage.
2.- Place the air nozzle in the top of the equipment (Fig. 1).
3.- Make sure that the 3-way selector switch is at OFF position.
4.- Plug the power cord into an AC household outlet.
5.- Move the 3-way selector switch to HI or LOW position in
accord to your necessities.
6.- Put the air nozzle in a distance between 10 and 15 centimetres
from the object to heat.
7.- Use the equipment in periods of 20 minutes and then turn off
for 3 minutes. In this way you can avoid an overheating.
8.- When you need to give some time to cool down the equipment,
you must place it in a vertical position. So you can obtain a better
ventilation and a better output (Fig. 2).
Before using your new Electronic i
Do not plug the equipment to any electrical extension.
We recommend to use the equipment in periods of time of
IMPORTANT
FEATURES
Before using your new Electronic i
8 hours maximum, to guarantee a long life time.
When the equipment reaches a high temperature, it will
disconnect automatically for two minutes, to prevent an
nsect killer, please read this instruction manual to prevent
overheating. After this period of time, the equipment backs to
any damage. Put it away in a safe place for future references.
work properly.
Fig. 1
SPECIFICATIONS
Input:
Cable diameter:
Cable length:
Dimensions:
Weight:
Before using your new Electronic i
Product design and specifications are subject to change
without previous notice.
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
1.- This warranty card with all the required information, invoice or
purchase ticket, product box or package, and product, must be
presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God,
mishandling, leaky batteries, failure to follow enclosed instructions,
improper repair by unauthorized personnel, improper safe keeping,
among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center.
Fig.2
127V~ 50/60Hz 1350W
2 x 18 AWG
170cm
9,8 x 7,8 x 2,8in
1,4lb
Product: Hot air gun
Part number: HER-260
Brand: Steren
WARRANTY
CONDITIONS