Dimplex BLF3451 Manual Del Propietário página 14

Fireplace Installation
3. Lift fireplace and insert into open-
ing. The fireplace's mounting trim
should be flush against the wall
(Figure 9).
4. Use the supplied bubble level to
level the fireplace within the fram-
ing, adjust as required.
5. Drive four supplied mounting
screws through the four mounting
holes located on the inside surface
of the fireplace chassis, into wall
studs (Figure 10).
6. Refer to Front Glass Installa-
tion section for final installation
procedures.
14
Figure 10
Wall
surface
Mounting hole
Mounting hole
www.dimplex.com