Nexxt Solutions Smart Wi-Fi camera Guia De Inicio Rapido página 8

Step 2
An audible sound and a blinking red or blue LED means
that the camera is ready to be added to the Nexxt Home
App. If you don't hear a sound or if the red LED is not
ashing, hold down the reset button for 5 seconds, Select
next step.
Note: Make sure you are on the 2.4GHz band, not the 5GHz.
The device will not connect to a 5GHz network.
Step 3
Enter your Wi-Fi password and select Con rm
Make sure you enter your correct network password.
Otherwise the device will fail to connect.