Steren BAF-0850 Manual De Instrucciones página 17

Make all connections with all the switches in the off position.
Make sure that the volume is at the lower level. You can adjust it later.
1. Connect the polarized cord to power source.
2. Connect a microphone to the MIC IN input via 6.3 mm plug.
3. Use the line input RCA jacks to connect a CD, MP3, DVD player
4. Turn on all devices. The Green LED will light to indicate when the speaker
is on.
5. Adjust the volume levels of the devices, as well as the speaker line level
and treble and bass tones to equalize the sound.
6. The red LED will be activated in case of detecting an overload and to
prevent any damage.
PLACEMENT
Speaker boxes are designed to be placed on the fl oor, in a table or mounted
on a speaker tripod; We recommend the BAF-150 tripod.
- Avoid placing the equipment in the corners of a room. This increases the
low frequency output and may cause sound distortion.
- Avoid placing the speaker against walls. This also increases the low
frequencies, but not as much as place it in a corner. However, if you need to
reinforce the low frequencies, this It is a good way to do it.
7 7