Fig. 5
5. Place the Seat (H) face-down on a clean, protected surface. Turn the chair face-down and center it
on the aprons. Using the predrilled holes on the corner blocks as guides, fasten in place with eight
5x60mm Pan Head Screws (C). See Figure 5.
Fa
Fig. 6a
6. Turn the chair upright. Glue six Wood Buttons (Fa) into the exposed holes. See Figures 6 and 6a.
Page 5 — 836Wa — 04/10
C
C
H
Fa
Fa
Fa
C
Fa
Fig. 6
Fa
Fa
C
x 8
Fa
x 6