Uline H-7160 Manual De Instrucciones página 2

1. Insert the included 5 volt AC power adapter into the
weather station and then into wall outlet.
2. Optional: Insert 3 new AAA batteries (not included) into
the weather station. Ensure correct polarity.
3. Insert 2 new AA batteries (not included) into weather
station's sensor. Ensure correct polarity.
The red LED will flash when transmitting.
4. After 5 minutes, place sensor in shaded outdoor
location.
SET TIME, DATE AND TEMPERATURE UNITS
NOTE: Only press or hold one button at a time.
1. Hold the TIME SET button for 3 seconds to enter time
set mode.
2. Press and release the ▼ or ▲ buttons to adjust values.
3. Press and release the TIME SET button to confirm
adjustments and move to the next item.
SETTINGS ORDER:
1. WWVB ON/OFF
2. Time Zone (See Chart)
3. Daylight Saving Time
4. 12/24 Hour Time Format
5. Hour
6. Minutes
7. Year
8. Month
9. Date
10. Fahrenheit/Celsius
4. Press and release the TIME SET button to exit, or wait
20 seconds without pressing buttons to return to
normal time display.
SET TEMPERATURE ALERTS
1. Hold the ALERTS button for 3 seconds.
2. The temperature alert value will blink in set mode.
3. Press and release the ▼ or ▲ buttons to adjust alert
values.
4. Press and release the ALERTS button to confirm
and move to the next alert.
PAGE 2 OF 12
SETUP
OPERATION
TIME ZONE
AST Atlantic
EST Eastern
CST Central
MST Mountain
PST Pacific
AKT Alaska
HAT Hawaiian
POSITION OUTDOOR SENSOR
• Mount the outdoor sensor on a north-facing wall or
in any well-shaded area. Under an eave or deck rail
is preferred.
• The maximum transmitting range to the weather
station is over 300 feet in open air, not including
walls.
TEMPERATURE ALERT ORDER:
1. Outdoor High
2. Outdoor Low
3. Indoor High
4. Indoor Low
5. Press and release the ALERTS button to exit, or wait
20 seconds without pressing buttons to return to
normal time display.
ARM/DISARM TEMPERATURE ALERTS
1. Press and release the ALERTS button to toggle
between the alerts Outdoor Hi, Outdoor Low,
Indoor Hi and Indoor Low. (See Figure 1)
• Arm the alert with the ▲ button.
• Disarm the alert with the ▼ button.
• Alert Bell icon appears when armed.
Figure 1
TEMP. TEMP. TEMP.
ALERTS ALERTS ALERTS
OUT OUT OUT
High High
Low
ACTIVE TEMPERATURE ALERT
• Beeps once per minute with flashing alert bell icon.
• Press any button to stop the alert.
TEMP. TEMP. TEMP.
ALERTS ALERTS ALERTS
IN IN
High
Low
0621 IH-7160
OUT
OFF
High