GPO PCD299 Manual Del Usuario página 12

Recording Cassettes
1. Insert an audio cassette with the side on which you wish to record
facing forwards (full reel on the right).
Ensure that the cassette is not copy-protected (the copy protection tab
on the top narrow side of the cassette must not have been removed).
2. Select the source from which you wish to record with the function
switch and then start playback from this source if necessary. The
sound source which you are listening to is the one from which the
recording is made. The recording level is controlled automatically.
Changing the volume does not change the recording.
3. Please press the "RECORD" button(the PLAYBACK button is
automatically pressed down at the same time). Recording now
begins. All previous recordings are automatically erased.
4. The recording can be interrupted briefly using the PAUSE key, or
stopped by means of the STOP/EJECT button.
Playing CD
1. Set the "FUNCTION" selector to "CD" mode.
2. Open the CD door and place a CD disc with the label up on the CD
compartment.
3. Close the CD door.
4. Focus search is performed if disc is inside. Total number of tracks is
read and appears on the display.
5. Press the "PLAY / PAUSE" button to start playing the CD.
6. Adjust the "VOLUME" control to the desired level.
7. Press the "PLAY / PAUSE" button again when you want to stop
playback temporarily.
12