Technical Specifications; Led Indicators - Axis Q74 Guia De Instalacion

Technical Specifications

You can find the latest version of the technical specifications at www.axis.com

LED Indicators

Note
• The Status LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance .
Status LED
Green
Amber
Red
Note
The Network LED can be disabled so that it does not flash when there is network traffic.
To configure, go to Setup > System Options > Ports & Devices > LED. See the online
help for more information.
Network LED
Green
Amber
Unlit
Note
The Power LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
AXIS Q7424-R Mk II Video Encoder
Indication
Steady green for normal operation.
Steady during startup, during reset to factory default or when
restoring settings.
Firmware upgrade failure.
Indication
Steady for connection to a 1 Gbit/s network. Flashes for network
activity.
Steady for connection to a 10/100 Mbit/s network. Flashes for
network activity.
No network connection.
17
EN