Technical Information - CNET CQU-906 Guía De Instalación Rápida

Unable to connect to a wireless network?
1. Ensure that the LEDs of your router are correctly lit.
Check whether your Wireless LAN settings (e.g. SSID, Channel Number) are the same as the router's.
Check whether you use the same encryption key (e.g. WEP or WPA) for both CQU-906 and the router.
2. Make sure that your CQU-906 is correctly installed.
Check that your CQU-906 is plugged in properly to the USB port or try to plug the CQU-906 into another USB
port if available.
The LED on CQU-906 should be lit. If not, (i) there could be a hardware problem, or (ii) CQU-906 is disabled or
(iii) device driver is not installed properly.
For additional information, please visit the product website:
http://www.cnet.com.tw

Technical Information

LED Status Light
LINK/ACT Lights when the adapter is ready to
use and flashes when it is active.
All manuals and user guides at all-guides.com
LINK/ACT
12-06G0397-B1