Intended Use; Important Safeguards - Westinghouse WKSV8001 Instrucciones

INTENDED USE

Use the device only for the purpose intended. Any other use may result in damage
to the device or injuries.

IMPORTANT SAFEGUARDS

General
1. Read this manual before first use thoroughly. It contains important information
for your safety as well as for the use and maintenance of the equipment. Keep
these instructions for future reference and pass it on with the device.
2. Pay particular attention to the warnings on the device and in this instruction
manual.
3. Use the device only for its intended purpose. Improper use may lead to
hazards.
4. This device is designed for household use only, not for staff kitchen areas in
shops, offices and other working environments, farm houses, by clients in
hotels, motels and other residential type environments, bed and breakfast type
environments use. It is not suitable for commercial use.
5. In the event of improper use or wrong operation, we do not accept any liability
for resulting damages.
6. The use of accessories and components not expressly recommended by the
manufacturer may result in injuries or damages and voids the warranty.
7. This device is not intended to be used by persons(including children) with
reduced physical, sensory or mental abilities or lack of experience and / or
lack of knowledge unless they are supervised by a person responsible for their
safety or have received instructions on how to use the device.
8. Children should be supervised to ensure that they do not play with the device.
9. Never leave the device unsupervised while it is switched on.
10. Do not place heavy objects on top of the device.
11. Never immerse electrical parts of the device in water during cleaning or
operation. Never hold the device under running water.
12. Do not under any circumstances attempt to repair the device yourself. For
servicing and repairs, please consult an authorised dealer or qualified customer
service centre.
13. This device should not be operated with an external clock timer or separate
remote control system.
Power supply
1. The mains voltage must match the information on the rating label of the device.
2. The power plug is used as the disconnect device. Please be sure that the power
plug is in operable condition.
3. Only removing the power plug can separate the device completely from the
mains supply.
4. Avoid damages to the power cord that may be caused by kinks or contact with
sharp corners.
5. Make sure, the device, including power cord and power plug are not exposed to
hot surfaces.
EN
6. Only unplug from the power outlet by the plug itself. Do not pull on the cord.
2
SOUS VIDE
FOR HOUSEHOLD USE ONLY