Quax 303100 Manual De Instrucciones página 17

303100 xx
6. Folding the travelcot
1. Take the mattress out of the travelcot.
2. Pull the center of the bottom 50 cm upwards.
3. Slightly lift top rail up while pressing the center button to release the rail. Once the rails are released,
push them down. The center of the bottom must be pulled up to release the top rails, if you can't release
the central button freely, lift the central plastic handle bar a bit higher, but do not force it. If the bed will not
fold, look for a partially latched top rail. Squeeze the latch button to release the rail.
4. Once all top rails are released, fold the travelcot to upright position.
7. Packing the travelcot
1. Put the travelcot in upright position and place the mattress with its soft side around the bed.
2. Pull the top velcro straps through the plastic loops on the opposite side of the mattress and fasten.
3. Pull the two lower velcro straps through the remaining plastic loops on the matress and fasten.
4. Insert the travelcot into the travel bag and leave the wheels and handle exposed for easy travel.
Reisbedjes
Reisebetten
Lits de voyages
Lits de voyages
Travelcots
Travelcots
Cunas de viaje
Quax Quax
First dreams First dreams
® ®
First steps First steps
17