Publicidad
PARTES
7
5
NO. DE ÍTEM
CANTIDAD
1
2
2
2
3
2
4
2
5
4
Kit de accesorios de las abrazaderas
6
4
7
4
8
1
NO DEVUELVA AL ESTABLECIMIENTO MINORISTA
Para solicitar asistencia en el montaje de la unidad, o para
¡PARE!
reclamar partes faltantes o dañadas
Llame al: Departamento de Servicio al Cliente de
MASTERBUILT al: 1-800-489-1581
1
2
3
4
6
DESCRIPCION
Barra de soporte corta
Barra de soporte central
Barra de soporte larga
Placa de soporte
Kit de accesorios del riel guía
Kit de pernos y arandelas
Bolso de herramientas
ASSEMBLY
3
2
2
STEP 2
STEP 1
Slide support bar (2) and (1)
Slide support bar (3) and (2)
together. Use the locking pin
together. Assembly should
to lock the two support bars
slide freely for expansion or
contraction.
into place.
5
4
7
4
5
STEP 4
STEP 5
Assemble support plate (4)
Align clamp kit (5) with truck
and clamp kit (5) as shown.
bed as illustrated. Repeat
Do not fully tighten bolts at
steps on opposite side.
this time.
Figure 1
STEP 7
Once everything is alligned,
tighten hardware (5) with a
socket or adjustable wrench.
8
1
STEP 3
Use assembly from steps 1
and 2 and insert support bars
into side pockets located on
both front and back of the tool
bag (8). Insert divider.
Truck
Bed
STEP 6
Place truck bag with support
bars installed into slots on
the hardware plate (4).
Assembly 2
Alternate mounting assembly for
truck rails. See Figure 1 for details.
Use alternate hardware (6) for
trucks with truck rails.
Hardware 6
Publicidad
