Publicidad
Step 5/Paso 5
Insert 3 cam locks (C) into the holes on xed shelf (1) and rail (2) to combine the divider (4) with them. Make sure cam
locks are fully insert and in correct orientation.
Conecte el Tablero vertical (4) al ensamblaje con 3 Bloqueos metálicos (grandes) (C).
C x 3
Step 6/Paso 6
Align the dowels on gable left (3) and gable right (4) with the holes on the left bottom (5), then combine them with
4 screws (G).
Conecte el Tablero izquierdo inferiorr (5) al ensamblaje con 4 Tornillos (G).
G x 4
4
2
3
4
3
C
5
groove inside
La ranura hacia adentro
G
09
Publicidad
