Replacing The Filter - Levoit Smart True HEPA Core 400S Serie Manual Del Usuario

CARE & MAINTENANCE (CONT.)
When Should I Replace the
Filter?
The filter should be replaced every 12 months.
You may need to replace your filter earlier
or later depending on how often you use
your air purifier. Using your air purifier in an
environment with relatively high pollution may
mean you will need to replace the filter more
often, even if is off.
You may need to replace your filter if you
notice:
• Increased noise when the air purifier is on
• Decreased airflow
• Unusual odours
• A visibly clogged filter
Note:
•
To maintain the performance of your air
purifier, only use official Levoit filters. To
buy replacement filters, go to Amazon
and search B08SQQK6K7.
•
Remember to reset
the filter (see page 14).
Cleaning the AirSight Plus
Laser Dust Sensor
The AirSight Plus Laser Dust Sensor can be
blocked by dust, which affects the sensor's
accuracy. Clean the sensor every 3 months.
Using your air purifier in an environment with
more dust may mean you will need to clean
the sensor more often.
1. Unplug the air purifier.
2. Place the end of a vacuum cleaner over
the sensor openings. [Figure 3.3]
3. Turn the vacuum on for at least 10
seconds to clean out dust.
after changing

Replacing the Filter

1. Unplug the air purifier. Flip the air purifier
over or turn it on its side. Remove the
filter cover (see Getting Started, page 7).
2. Remove the old filter.
3. Clean out any remaining dust or hair
inside the air purifier using a vacuum
hose. Do not use water or liquids to
clean the air purifier. [Figure 3.2]
4. Unwrap the new filter and place it into the
housing (see Getting Started, page 7).
5. Replace the cover. Plug in the air purifier.
6. Reset the Check Filter Indicator (see
page 14).
Storage
If not using the air purifier for an extended
period of time, wrap both the air purifier and
the filter in plastic packaging and store in a
dry place to avoid moisture damage.
Figure 3.2
Figure 3.3
EN
15