EDM Product 07678 Manual Del Usuario página 14

07678
REF.
PARTS OF THE MIXER
1) Measuring cup
2) Glass cover
3) Glass cup
4) Seal ring
5) Cutting blades
6) Cup base
7) Motor base
8) Rotary switch
BEFORE THE FIRST USE
- All parts of the blender must be thoroughly cleaned before use.
- Pull out the required length of cable from the ordered cable at the base of the
blender and connect the device to the mains.
Assemble the jar:
- Place the rubber sealing ring (4) on the inner edge of the knife unit (5).
- Place the knife unit with sealing ring on the base of the cup (6).
- Mount the carafe (3) on the cup base unit and tune the cup base unit, and
turn clockwise until the carafe clicks into place.
- Mount the Measuring Vessel (1) on the lid of the jug (2).
- Secure the lid on Jar and press down.
Insert the jar:
- Make sure the blender is switched off (Change in setting '0').
- Place the bowl assembly on the motor base unit (7) which is securely
attached.
HOW TO USE
- Put the food product you want to process in the container.
- Put the lid on the container and close it securely. Place the measuring cap
into the hole in the cap and turn it clockwise to lock it.
- Mount the glass cup to the cup base unit and tune the cup base unit, and
tune the cup base unit to the steering unit clockwise.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
1
2
3
4
5
6
7
8
INSTRUCCIONES IMPORTANTES DE SEGURIDAD