Automatic Icemaker - GE 20 Manual Del Propietario Y Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

About the automatic icemaker.
A newly-installed refrigerator may take 12–24 hours to begin making ice.
Power
Switch
Icemaker
Green
Power Light
Feeler Arm
10

Automatic Icemaker

(on some models)
The icemaker will produce seven cubes
per cycle—approximately 100–130 cubes
in a 24-hour period, depending on freezer
compartment temperature, room
temperature, number of door openings
and other use conditions.
If the refrigerator is operated before the
water connection is made to the icemaker,
set the power switch in the OFF position.
When the refrigerator has been connected
to the water supply, set the power switch to
the ON position.
The icemaker will fill with water when it cools
to freezing. A newly-installed refrigerator
may take 12 to 24 hours to begin making
ice cubes.
Throw away the first few batches of ice to
allow the water line to clear.
Be sure nothing interferes with the sweep of
the feeler arm.
Ice Storage Drawer
To access ice, pull the drawer out.
To remove the drawer, pull it straight out and
lift it past the stop location.
Icemaker Accessory Kit
If your refrigerator did not come already
equipped with an automatic icemaker,
an icemaker accessory kit is available at
extra cost.
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale, and shrink. If the
ice cubes become stuck in the icemaker, turn
off the icemaker, remove cubes and turn
icemaker back on.
There is an upper freezer shelf
above the icemaker that can be
used for storage.
Check the back of the refrigerator for the
specific icemaker kit needed for your model.

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

2225

Tabla de contenido