Kohler K-1246-CD Guia De Inicio Rapido página 2

1-1/2"
(3.8 cm)
Drop-In Rim Detail
42" (106.7 cm)
1-1/2" OD
Product Information
Applicable product:
Drop-in bath whirlpool with custom pump
location
Drop-in bath whirlpool with custom pump
location
Fixture*:
Bathing well:
Basin area, bottom 44" (111.8 cm) x 31" (78.7 cm)
Basin area, top 50" (127 cm) x 34" (86.4 cm)
Weight 110 lbs (49.9 kg)
To overflow:
Water depth 15" (38.1 cm)
Capacity 69 gal (261.2 L)
* Approximate measurements for comparison only.
Pump: V
1-speed 120
Included component:
Cut-out template
1013770-1-C
K-1246-CD
Pump/Control Access 20" (50.8 cm)
W x 15" (38.1 cm) H Min (Typical)
5-3/8" (13.7 cm)
17"
16-1/16"
(43.2 cm)
(40.8 cm)
3-1/2"
(8.9 cm)
21"
(53.3 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1246-CD
K-1246-CF
Hz A
60 7.5
113926-7
No change in measurements with drain
shown. (K-7161-AF or K-7161M-AF)
Recommended faucet area.
12-5/16"
(31.3 cm)
60" (152.4 cm)
1-3/16" (3 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
41 lbs/square foot (198 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
7-1/2"
(19.1 cm)
5" (12.7 cm)
Max
Max
K-1246-CF
Pump/Control Access
20" (50.8 cm) W x 15"
(38.1 cm) H Min (Typical)
120 V, 15 A, 60 Hz
Kohler Co.