CLEANING AND MAINTENANCE
1.
Always unplug your Egg Cooker appliance from the electrical outlet and allow to
cool completely before cleaning.
2.
Clean heating plate and main body with a wet cloth.
3.
Wash the attachments and lid in the sink with hot, soapy water.
4.
Remove any mineral deposits left behind from water by wiping the plate with a
paper towel moistened with one tablespoon of white vinegar.
5.
White vinegar also works as an antibacterial agent.
CAUTION: Base is extremely hot after use. Allow unit to cool before handling or
cleaning.
NOTE: If unit is not cleaned with white vinegar on a regular basis, minerals naturally
occurring in water will build up causing discoloration of eggshells. However, this
does not affect the taste of the eggs.
6.
Wipe main body housing with a damp cloth. DO NOT immerse in water.
7.
Place clean egg rack, poaching tray, and cup inside the Egg Cooker body to store.
8.
Any other servicing should be performed by an authorized service representative.
YOUR EGG COOKER IS NOT DISHWASHER SAFE
TROUBLESHOOTING:
PROBLEM
Power Indicator
Light is already
ON after
plugging into
power outlet.
There are
brown stains on
the heating
plate.
Questions? We're here to help! Visit: www.maxi-matic.com for support on this product.
CAUSE
The Power
Button was
unintentionally
pushed to ON
prior to
plugging into
power outlet.
Residue from
usage.
POSSIBLE SOLUTION
cannot
You
push the Power button again to
turn the egg cooker OFF. Fill Measuring
Cup to "Soft" line, pour into heating plate
and plug the cooker into power outlet. The
egg cooker will cycle through and power
OFF automatically once all water has
evaporated. The Power Indicator Light will
turn off. Allow the unit to rest/cool for 5
minutes and proceed to follow the
instructions in this manual to use as
normal.
Use a paper towel or a dish rag and white
vinegar to clean the heating plate.
6