Initial Setup - TCL LE32HDF3300 Guia Del Usuario

Initial Setup

Initial setup involves selecting all the settings required to be
able to search for and store all the channels you can receive.
Make sure that the television is switched on and follow all the
steps in turn specified hereafter.
The first time you switch the set on, the Initial Setup Wizard
opens, which guides you through the initial setup process.
1. The first step of the setup requires you to select your
preferred language for the menu system. Press ▲/▼ to
select your language, then press OK/► to enter the next
screen.
2. A menu screen asks you to set the TV Location.
• Choosing "Home" for the TV Location assigns the optimal
picture settings for most home environments.
• Choosing "Retail", which is not Energy Star compliant,
sets the unit up with predefined settings for retail displays.
In this setting, the power consumption may exceed the
requirements of the Energy Star® qualification.
Use ▲/▼ to select the desired location setting (Home/
Retail); then press OK/► to continue to the next screen.
Note: if you select Retail , a screen menu will display to ask
you go back to the previous menu to select Home again, or
you can confirm to proceed to the next screen.
3. Use ▲/▼ to select the current local time zone. Press OK/►
to continue to the next screen.
4. On the Tuner screen, select either Antenna or Cable/Sat.
Press OK/► to continue to the next screen.
Note: If you are using a satellite or cable set-top box, you do
not have to complete the Channel Scan.
5. The Channel Scan screen is now displayed. The default
choice is to scan. Press OK/► to begin the channel scan for
available channels to be stored in the TV's memory.
Note: If you do not want to scan for channels at this time,
you can select Skip Scan or press OK/► to stop the
scanning process, and perform the channel scan later in the
Setup menu.
6. The screen will change to show the progress of the
process.
7. When the scanning is finished, the unit has completed the
Initial Setup.
8. Press CLEAR to exit the Wizard and begin watching TV.
Connections and Setup
Initial Setup
Please select your language:
Initial Setup
TV Location
This mode is Energy Star compliant.
Back
Initial Setup
Please select your time zone:
Back
Initial Setup
Please select your tuner mode:
Back
Initial Setup
First, please connect Cable/Sat or
Antenna. Start Channel Scan
now? If you skip this step, the
Channel Scan could be performed
in Setup menu later.
Back
11
Language
English
Français
Español
Select Next
OK
TV Location
Home
Retail
Select Next
OK
Time Zone
Hawaii
Alaska
Pacific
Mountain
Central
EASTERN
Eastern
Atlantic
Newfoundland
Select Next
CLEAR
OK
Antenna
Cable/Sat
Select Next
CLEAR
OK
Channel Scan
Scan
Skip Scan
0%
Select Next
CLEAR
OK
Exit
Tuner
Exit
Exit