How To Use - Elite Platinum EMT-625B Instrucciones De Uso

HOW TO USE

Specific safety advice for slicing and for handling the slicer:
• TO PREVENT SERIOUS PERSONAL INJURY, NEVER TOUCH
THE BLADE WHEN THE SLICER IS OPERATING!
• NEVER TRY TO CLEAN OR SERVICE THE MACHINE IN
ANY WAY WHILE IT IS IN OPERATION AND THE BLADE IS
RUNNING!
• Always use the Meat/Food Holder. Make sure that you're
pressing the meat firmly against the Support Plate so that
it doesn't fall off and expose your extremities to the blade.
• IF AN ITEM OF FOOD COMES OFF OF THE FEED SLIDER
TABLE OR BECOMES LOOSE AS YOU ARE FEEDING IT TO
THE BLADE, TURN THE MACHINE OFF, WAIT FOR THE
BLADE TO STOP AND THEN TRY TO REPOSITION YOUR
FOOD ONTO THE FEED SLIDER TABLE AND AGAINST THE
SUPPORT PLATE. DO NOT TRY TO DO THIS WHILE THE
BLADE IS RUNNING!
• Use the slicer only for slicing normal household foods and
not for any other purpose. Do not use the slicer for slicing
deep-frozen foods, bones, foods with kernels or for slicing
packaged foods.
• Never use the slicer for more than 10 minutes continuously.
• For safety reasons, the slice thickness must be returned to
the "0" setting after each use.
• After assembling the unit, set your desired slicing thickness
by turning the Thickness Knob. Slicing thickness can be set
to 0 | 5mm (0.2") | 10 mm (0.4") |15 mm (0.6").
• Place your food item on the Feed Slider Table. Use the
Meat/Food Holder to push the food item firmly against the
support plate.
• Pushing the switch to "ON" , the cutting blades will
immediately begin to run. To stop the continuous
operation, move the switch quickly to the "OFF" position
and wait until the cutting blades come to a complete stop.
• Slightly press the food to be sliced forward, guide it along
towards the Cutting Blade.
• When finished, pull your food item away from the
blade and shut the unit off. Wait for the blades to stop
completely before unplugging the unit from the electrical
outlet.
• Switch the Thickness Knob back to "0" .
• Once the blade has stopped and the unit has been
unplugged from the electrical outlet, disassemble the parts
for cleaning.
• Be sure to dry all parts thoroughly before reassembling
them for use or for storage.
6 Questions? We're here to help!
Visit: www.maxi-matic.com for support on this product.
NOTE:
Do not push your
food item too hard
against the Support
Plate; only push hard
enough to keep the
.
food item in place
CAUTION:
-
The cutting blade
continues to rotate for
a few seconds even
after the slicer has
been switched off. Use
caution!
- To safeguard your
fingers, always use the
Feed Slider Table and
the Meat/Food Holder.