Gardena smartsystem Manual De Instrucciones página 19

Reset
You may need to use the reset function if you want
to link your Gateway to a new Wi-Fi network,
for example, or if you have changed your Internet
provider.
1. Press and hold the reset button.
2. At the same time, plug in the Gateway.
Hold down the reset button until the power
LED lights up green.
The power LED will light up continuously for
approx. ten seconds, before it starts to flash.
The flashing can last for approx. one minute.
When the power LED lights up continuously
again, your Gateway is ready to connect to the
Internet.
19