PACIFIC PLAY TENTS 20414 Instrucciones

Thank you for purchasing this tent & tunnel combo from our great line of products. We at Pacific Play Tents® are confident that
it will provide you and your children with endless hours of creative fun and enjoyment year-round. We encourage you to read
and understand each step of the set-up process prior to assembly. Set-up is easy and fun.
Made with flame retardant fabric, which meets CPAI-84 specifications and ASTM F963 toy safety standards.
It is NOT FIRE PROOF. The fabric will burn if left in continuous contact with any flame source.
CONTENT: Shell: 100% Polyester, Frame: G-3 patented pole system, Tunnel Frame: Padded spring steel
PLEASE READ ALL OF THE DIRECTIONS PRIOR TO SET UP. DO NOT APPLY EXCESS FORCE TO THE POLES DURING ASSEMBLY.
1.
TENT: Assemble sections of shock-corded poles using ferrules. (A).
2.
Lay tent on the ground and pull out all corners. Insert one assembled pole through a pole sleeve. Continue sliding pole through
the sleeve, over the top of the tent and through the sleeve on the opposite side. Tent pole sections will stay connected if poles are
pushed (not pulled) through the sleeves (B). (NOTE: Do not put ends of poles into pole pockets yet.)
3.
Repeat the same process with the second assembled pole (the poles should crisscross at the top of the tent).
4. Now place each of the pole ends into its respective corner pole pocket (C). The tent will now take shape. Each corner holds only
one pole end.
5.
Using ties at top of tent, tie a bow around the crisscrossed poles (E).
6.
TUNNEL will open up automatically, as it is basically one large spring. Be sure to hold tunnel away from you as it will spring
open. Unfasten Velcro™ straps carefully (D)
7.
Roll up flap of tunnel port on tent and use ties to secure. Next, insert the Tunnel through the port. (NOTE: The diameter of the
tunnel will appear to be larger than the diameter of the hole. However, the tunnel is made to fit snug and will go in quite easily.)
For best fit, insert the tunnel 6 to 8 inches into the tent (E).
8.
To put the Tunnel away, compress the tunnel down until it is completely flat. Then secure the Velcro™ straps. Remember to
always keep a firm grip on the tunnel while compressing it down to prevent it from springing open.
Some Additional Tips...
✱ The tent & tunnel should be assembled with adult supervision. Do not allow children to jump on the tent or tunnel.
✱ Set up on a soft or smooth surface only. Avoid sharp objects while playing with the tent & tunnel.
✱ Do not use tent & tunnel near any open flame or fireplace.
✱ The tent & tunnel are made from water repellent polyester. However, they should not be left outdoors for prolonged periods, as
sunlight can weaken or fade the fabric. Continued exposure to water (from sprinklers) can cause mildewing. Allow to dry
thoroughly before storing.
✱ Clean with a soft cloth or sponge, cool water & mild liquid soap. Air dry. Never use hot water or place tent or tunnel in dryer.
POLE SECTION
A
B
(top view)
POLE
SLEEVE
POLE
POCKET
POLE
C
Rev. 120517
FERRULE
POLE
SLEEVES
POLE
POLE
POLE
POCKET
Tent & Tunnel
COMBO
i n s t r u c t i o n s
TIE
E
POLE
POCKETS
# 20414, 20420, 20425, 20435, 20855, 30414, 30514,
30415, 30470, 39412, 40610,
D
POLE
SLEEVE
POLE
PACIFIC PLAY TENTS, INC. Los Angeles, CA 90023
CUSTOMER SERVICE: Toll Free (877) 722 - 0083
Age 3 and Up
VELCRO™
STRAPS
TUNNEL