Tabla de contenido
Publicidad
STEP 11
12
(x32)
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Carefully turn the cabinet over on it's front side.
Position back panel as shown. Align squarely with outer edges. Flush
bottom edge of back panel with bottom edge of bottom and nail
straight into back edges of left panel, right panel, top and bottom.
B
19
unfinished
surface
M
Flush the bottom edge of the Lower Back Panel
with the bottom edge of Bottom (D).
12
D
Publicidad
Tabla de contenido
