ePropulsion CH4200 Guia De Inicio Rapido página 2

Introduction
The E battery charger is a product designed for the E-Series Battery. It has: wide input voltage range,
universal voltage; small interference to other electrical equipment; designed in accordance with IP66
protection level, high waterproof performance; can be used in parallel; quiet work, high reliability, simple
installation, operation, and maintenance.
Specifications
Model CH4200
Input voltage 85~265 VAC
Input current <9 A @220 VAC
<12 A @110 VAC
Power factor ≥0.99
Rated output voltage 48 VDC
Output current 30 A @220 VAC
~20 A @110 VAC
Parallel connection 8 (Max)
Conversion efficiency ≥93%
Protection level IP66
Operation temperature -25 °C ~ 55 °C
Storage temperature -40 °C ~ 85 °C
Certification CE
In the Box
1 set
Charger
1 piece
User manual
1 piece
Communication cable
Operation
1.
Charge the battery by one charger:
Ensure the power has been
switched off, and complete the
wiring according to the figure.
2.
Turn on the battery power
button first, then turn on the
AC
AC switch.
3.
input
The green light of the charger
cable
flashes, indicating that the
charger is charging normally.
*For the DC output cable, red is
positive, black is negative.
LED Indicator
Flashing green light Charging
Steady green light Charging stopped / fully
charged
Flashing red light Failed to communicate
with the battery
Green and red lights No battery connected
flash alternately
Other Charger error, please
restart the charger, if the
problem persists, please
contact ePropulsion
authorized dealer
Y type communication cable
1 piece
AC input cable
1 piece
DC output cable 1 piece
E-Series Battery
DC
output
cable
Communication cable
Charge the battery by multiple chargers:
AC
input
cable
Y type communication cable
Notes
•
Do not puncture, throw, drop, bend or modify the charger.
•
The charger should be used in well ventilated, dry, particle free environment.
•
The charger should avoid direct sun exposure.
•
Opening the housing of the charger without prior written consent of the manufacturer voids the
manufacturer's warranty immediately.
Warranty
ePropulsion E Battery Charger is guaranteed against any manufacturing defects for TWO years
(uncommercial) from the date of purchase.
Free warranty is only validated upon the presentation of Warranty Card, and evidence of purchase from
an authorized ePropulsion dealer.
Conditions:
•
Valid date of purchase should be established by the first-hand purchaser with original sales slip.
•
Free warranty is not transferable and will not be reissued.
•
The warranty is valid only when the information is correct and complete.
Warranty does not cover:
•
Minor faults producing no influence on the intended function of the product.
•
Faults resulting from any improper operation that contradicts the user manual.
•
Accessories supplied with the product.
•
Damage caused by accident, misuse, liquid damage or unauthorized repair.
•
Damage caused by dropping, improper care or storage.
If warranty expires, users can still enjoy maintenance services from ePropulsion authorized
dealers with minimum maintenance charge.
E-Series Battery
DC
output
cable
Communication cable