Charging External Devices; Technical Specifications - Dörr SC-5000 Manual De Instrucciones

CHARGING THE SOLAR POWER BANK VIA EXTERNAL DEVICES (PC, LAPTOP)
- Plug the supplied USB cable into the Micro USB port (3) and connect the Power Bank with your PC or laptop.
- While charging the LED indicator (2) fl ashes blue.
- After charging is completed the LED indicator turns off . Disconnect the Power Bank from the power source.

CHARGING EXTERNAL DEVICES

- Connect the device you want to charge, with one of the two USB ports (4 or 5) using the USB cable.
- Press the ON/OFF button (1) once. The LED indicator lights blue and the charging process starts.
- After charging is completed disconnect the device from the Power Bank. The blue LED indicator turns off and
the power bank will turn automatically in daylight mode (fi rst LED lights green).
Please note:
If you want to charge two devices simultaneously, we recommend to charge the Power Bank 100%.
LED TORCH FUNCTION
Press the ON/OFF button (1) twice in quick succession and the LED (7) turns on.
To turn off the LED press the ON/OFF button (1) twice again in quick succession.

TECHNICAL SPECIFICATIONS

Built-in battery
Capacity
Solar cell
Input
Output
USB cable
Operating temperature
Dimensions
Weight
Content
Li-Polymer rechargeable battery
5000 mAh / 5 V (₌ 25 Wh)
^
200 mA / 5 V
DC 5 V / 1 A (Micro USB)
DC 5 V / 2x 1 A (2 USB Ports)
USB standard A plug / USB Micro B plug
10°C - 45°C
143 x 75 x 14 mm
143 g
Solar Power Bank, USB cable, snap hook, instruction manual
9