Manuales relacionados para RTA TECHNI MOBILI RTA - B005
Resumen de contenidos para RTA TECHNI MOBILI RTA - B005
- Página 1 MODEL RTA - B005 Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference. MODEL RTA-B005...
- Página 2 MODELO RTA - B005 Gracias por comprar uno de nuestros productos. Por favor lea cuidadosamente las instrucciones de ensamblaje antes de instalar la unidad. Por favor guarde este manual para referencias futuras. MODELO RTA-B005...
- Página 3 RTA-B005 DIMENSIONS Lowest position Highest position Product Size: 21.5"W x 16"D x 32~44"H MAXIMUM WEIGHT CAPACITIES DO NOT exceed this limit Please use care and good judgement when placing objects on wood surface...
- Página 4 x1set...
- Página 8 Use Screws (F) to fix the Magnetic Catch (17A) to the inside face of Top Panel (8). Use Screws (F) to fix the Steel Plate (17B) to the Drawer Panel (18). Use tornillos (F) para fijar el cerraje magn tico (17A) é...
- Página 9 Screw Bolts (D) to the inside face of the Right Panel (2). Insert the other double side Pin (H) into the hole of Drawer Panel (18). Join the panel (2) with the semi structure built in step 3, and make sure to turn all the corresponding cam locks on panels (4) and (6) to secure the bolts.
- Página 10 P.10 Screw Bolts (D) to the inside face of the Top Panel (8) . Then insert the Bolts into the holes of the Back, Left and Right Panels (4,1,2). Finally, tighten the corresponding cam locks. Atornille los pernos (D) en la superficie interior del panel superior (8) .
- Página 11 P.11 Use Screws (E) to fix the Left & Right Tilting Mechanisms (13&14) to the Main Panel (12). Use Tornillos (E) para fijar los Mecanismos de giro Izquierdo y Derechos (13 y 14) al Panel Principal (12). SCREWS TORNILLOS 6X12 MM 8PCS Assemble the Plastic Cover (11) to the Lateral Structure (9).
- Página 12 P.12 Use Screws (B) to fix the Protection Rail (15) to the Main Panel (12). Use tornillos (B) para fijar el Riel de Protecci n (15) al ó Panel Principar (12). SCREWS TORNILLOS 5X16 MM 3PCS Use Screw (G) to fix the Handle (19) to the Drawer Panel (18).
-
Página 13: Care And Maintenance
CARE AND MAINTENANCE English - DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT, OR EXTREME ENVIRONMENTAL CONDITIONS. EXPOSURE WILL DAMAGE THE PRODUCT, WHICH IS NOT COVERED BY THE WARRANTY. - DO NOT USE SOLVENTS OVER SURFACES OR STRUCTURAL TUBES. SURFACES MUST BE CLEANED WITH A SOLUTION OF A SMOOTH SOAP AND WATER, THEN CLEARED WITH A DRY TOWEL.