VGE xclear FLOW-MATIC Manual De Instrucciones página 13

SETTINGS DESCRIPTION
TOUCHSCREEN
SETTINGS MENU Use arrows to select
cleaning frequency; daily
up to every 30 days.
SETTINGS MENU Use arrows to select rinse
with water duration; 30 or
90 seconds.
SETTINGS MENU Rinse with air. Use arrows
to select blower durati-
on; 0,5 up to 3 minutes,
adjustable in 0,5 minute
steps.
SETTINGS MENU Use arrows to select
backwash duration; 0,5
up to 5 minutes in 0,5
minute steps
SETTINGS MENU Use arrows to select
rinse duration; 0,5 up to
5 minutes in 0,5 minute
steps (step 5/5).
SETTINGS MENU Use arrows to select Blue
Eco pump speed during
Backwash in 5% steps.
SETTINGS MENU Use arrows to select Blue
Eco pump speed during
Filtration in 5% steps.
MAINTENANCE AND DISASSEMBLY
Warning - To reduce the risk of electric shock, the device must be switched off and completely
de-energized before starting maintenance or disassembly. Follow the manual instructions
during maintenance/ disassembly.
1. Disconnect the unions (2+3) and drain the water from the system.
2. Open the pipe clip of the stand and remove the stand from the system.
3. Maintenance of the automatic valves must be performed at least once a year. This can be done
DISPLAY FIGURE
Settings
Wash beads every:
Up to
1 day(s)
ok
Settings
Rinse with water:
Up to
30 sec.
ok
Settings
Blower time:
Up to
0,5 min.
ok
Settings
Backwash time:
Up to
0.5 min.
ok
Settings
Rinse time:
Up to
0.5 min.
ok
Settings
Blue Eco - wash
Up to
10% power
ok
Settings
Blue Eco - continu
Up to
10% power
ok
XCLEAR FLOW-MATIC MANUAL |
DISPLAY FIGURE
Settings
Wash beads every:
30 day(s)
ok
Settings
Rinse with water:
90 sec.
ok
Settings
Blower time:
3.0 min.
ok
Settings
Backwash time:
5.0 min.
ok
Settings
Rinse time:
3.0 min.
ok
Settings
Blue Eco - wash
100% power
ok
Settings
Blue Eco - continu
100% power
ok
EN
13