Commissioning - T.I.P. SWEEP 2000 Traducción De Las Instrucciones De Uso Originales

Fig. 1

5. Commissioning

5.1. Before first commissioning
•
Place the filter on the telescopic tube and lock it by turning it (Fig. 2.1)
•
Then place the suction tube over the filter in the guide and fix it by turning it slightly (Fig. 2.2)
Fig. 2.1
5.2. Charging
Before initial operation, the device must be fully charged for approx. 4-5 hours using the USB cable supplied and
a standard USB adapter (5 V DC, not supplied), through connection with a standard household socket (230 V) in
an indoor area. The charge status is displayed during the charging process.
•
A green light indicates that the device is fully charged.
•
A red light indicates that the device is not yet fully charged.
5.3. Adjusting the telescopic tube
•
Loosen the lower handles by twisting them slightly against each other.
•
Pull the upper handle to lengthen/shorten the telescopic tube.
•
Set the telescopic tube to the desired length.
•
Fix the adjusted length by turning the lower handles.
Fig. 3
Fig. 2.2
3
9