Getting Started; Charging The Device; Battery Management - Sigma Multilaser Manual Del Usuario

7. GETTING STARTED

CHARGING THE DEVICE

· Connect one end of the power adapter to the socket and the other end to the power jack
to charge the device.During charging, the battery symbol is:
· after charged, the battery symbol turns into:
You can use USB cable to charge the device.
You can use the device while charging; however, it will extend the charging time.

BATTERY MANAGEMENT

The battery electricity isn't full when it is packed. It is recommended to charge at least
four hours before using the device.
The charging time and discharging time of the battery are limited. However, you can
try the following measures to extend the life of the battery:
· Use the device at least once every week.
· Charge the battery regularly.
· Do not keep the battery too low for long time.
· Always keep the device and battery away from heat source.
START-UP
Press and hold the power switch for five seconds (
nb008_USER_MANUAL_SIGMA.indb 41
.
).
ENGLISH
29/03/2012 09:34:59
41