User Servicing Instructions - LF Holiday Living & Design W14F0391 Manual Del Usuario

5. Open all the branches.
6. Shape the branches. Starting with tips farthest
from the trunk, spread one to the right, one to the
left and one at the center of the main stem.
Plug electrical cord into a properly grounded outlet.

USER SERVICING INSTRUCTIONS

Replace the fuse.
Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.

Open fuse cover. Slide open the fuse access cover on top of attachment plug toward blades.

Remove fuse carefully.

Risk of fire. Replace with only a 3 Amp, 125 volt fuse (provided with product).

Close fuse cover. Slide close the fuse access cover on top of attachment plug .

Replace the lamp.
Grasp plug and remove from the receptacle or other outlet device.

Do not unplug by pulling on the cord.
Pull bulb and plastic base straight out of lampholder.

Replace with only a 2.5 volt, 0.425 watt super bright type bulb (provided with product).

If the new lamp base does not fit in lampholder, follow these steps:
Remove the base of burned out bulb by straightening lamp leads, and gently pull bulb out.

Thread leads of new bulb through holes in old base with one lead in each hole.

After bulb is fully inserted into base, bend each lead up so that the leads will touch the

contacts inside the lampholder.
5 5
6
6