Product Introduction - Starblitz SRINGLED480+ Guia Del Usuario

EN
NOTES
1. Please read this manual in details before using it.
2. Disassembling is strictly prohibited. No unauthorized welding LEDs without professional LED weld technician.
3. Please unplug when you are not using the product to prevent power loss.
4. Please pay attention to safety rules: don't fall it down, it may cause fire.
5. The quality warranty doesn't include the damage caused by human factors.
1
1/4 screw mounting hole
2
Knob to adjust brightness light
3
Knob to adjust warm/white light

PRODUCT INTRODUCTION

The SRINGLED480 ring light adopts high-brightness LEDs. Its life time is longer than 50000 hours. It's efficient,
energy saving and low light loss. Inside power adapter can supply power from 100-250V and the color tempe-
rature can be adjusted from 3000-6500K with stable quality (CRI ≥ 90). Ring light can be applied to indoor and
outdoor shooting, portrait photography, wedding photography, makeup lighting and lighting filling.
OPERATING INSTRUCTION
1- Install the ring light on the light stand and adjust it to find the perfect angle.
2 - Plug power line to the ring light. Press the power switch to turn on the light. The brightness light can be
adjust through the screw knob and the brightness of the warm/white light can be adjust through the other
screw knob. The color temperature is controlled in this way.
3 - It's possible to use a mobile phone holder (sold separately): connect the phone holder to the hot shoe
on the ring light and screw the knob to Iock it; then, put the mobile phone into the holder; finally, adjust the
shooting angle of the mobile phone and get it started.
4 - It's possible to use a make up mirror (sold separately): focus the installation part on the mirror to the screw
hole on the middle of the ring light, then screw the knob to get it locked.
5 - It's possible to use a camera: screw the dedicated screw (sold separately) for the camera into the screw hole
on the middle of the ring light, then install a camera on it.
6 - Please turn off power and unplug the power line after shooting.
FEATURES
Model
Power
Illuminance
CCT
CRI
LED Qty
Light angle
Operating voltage
Power line, user guide, shockproof
Standard access
bag, light stand and ballhead
4
Hot shoe
5
1/4 mounting screw
6
Power switch
NOTES AND MAINTENANCE
1250019
substances to avoid the risk of explosion, fire or burns.
60W
3600 LUX
the information in Safety Precautions and Cautions on Use, which may cause an accident.
3000-6500K±200K
≥ 90
your reseller first or refer to Starblitz.fr.
480 PCS
120°
24-month warranty.
AC:100-250V
Do not use the equipment near flammable gases, gasoline, benzene, thinner or similar
Keep the equipment out of the reach of children. Young children cannot understand
Do not attempt to disassemble, repair or alter the equipment yourself. Please contact
7
Power input interface
8
Angle screw
9
Light stand screw