Safety Instructions; Inspection And Maintenance - Hörby Bruk 4072 Modo De Empleo

INSTRUCTIONS FOR USE

SAFETY INSTRUCTIONS

1. Please keep this instruction sheet safely for future reference.
2. Please do not modify the product or the assembly details in any way. Modifications will affect the struc-
tural integrity and replacement parts will be at the buyer's expense. Inappropriate use or faulty appli-
cation of the product are explicitly forbidden and absolve the manufacturer of all liability. This product
needs to be mounted by an adult before use.
3. The use of the item is allowed only under continuous supervision by an adult. The product is suitable
for individuals weighing up to 70 kg. The product is not suitable for children under 36 months, due to
a lack of extra safety precautions and taking into account the limited mental capacities of toddlers.
4. This product meets all security aspects of the European standard EN71-1, EN71-2, EN71-3 and EN71-8.
It is only suitable for family domestic use, both indoors and outdoors.
5. When mounting or assembling the product attention should be given to the minimum required distance
between the product and eventual obstacles: walls, fencing,... An impact area like specified in FIG I
around the slide must be guaranteed. Obstacles must be at least 2 m away from the equipment. The
ground must be level in this area.
6. In this safety area no hard, angular or pointed objects should be present. The surface underneath the
product should be flat and shockabsorbing. The product must not be placed on asphalt, concrete or any
other hard surface. We advise the removal and storage of all accessories during the winter because the
characteristics of the soil (when frozen) are not suitable for safe play.
7. To avoid slides heating up, do not place them facing the sun. In warm weather, check that the slide is
not too hot.
8. All pieces should be checked regularly. For replacement material and expansion of the playground
equipment, please contact the supplier. Consequently safety will be guaranteed.

INSPECTION AND MAINTENANCE

The frequency of inspection and maintenance will vary with the type of equipment or materials used or
other factors (e.g. heavy use, levels of vandalism, coastal location, air pollution, age of equipment, ...).
Routine visual inspection (weekly to monthly)
- Always check that the bolts and nuts are securely fastened.
- Check the shock absorbing surface for objects that don't belong there.
- Check for missing parts.
- Check the equipment ground clearances.
Operational inspection (1 to 3 months)
- Check the stability of the construction.
- Check every part for excessive wear and replace when necessary.
Annual inspection (1 to 2 times per year)
- Check for rust and corrosion.
- Check every part for excessive wear and replace when necessary.
2
TOOLS
(1) (2)
10
(1) Ratchet spanner with cap 10
(2) Cross head screwdriver
(3) Drill 6 mm
Freestanding ladder for slide
(3)
6
EN