Power Dynamics PDX350 Manual De Instrucciones página 4

OVERVIEW FRONT PANEL
1. Power
Once you have connected all
your cables, you can turn the
PDX350 power on by pressing
the power button, pressing the
button a second time will turn off
the unit.
2. USB
Here you can connect external
USB devices like USB sticks or
external USB hard disks.
3. CD/USB
Choose with this button if you
will play from USB device or CD.
4. Disc tray
The disc tray is where the CD is
held during loading, unloading
and playback, and holds both 12
cm and 8 cm CD's. (Do not force
the cd tray to close. Excessive
force will damage the cd
mechanism, use the open and
close buttons)
5. Eject
Pressing the eject button will
open or close the disc tray. The
disc tray will not eject in play
mode.
6. Jog Mode
When the jog mode LED is illuminated it indicates the jog wheel is in search mode, when LED is blinking the jog mode
is in scratch mode and when not illuminated it indicates that the jog wheel is in pitch bend mode.
7. Pitch
Press the pitch button to activate the pitch fader. Press the pitch button again to deactivate this mode.
8. Pitch Fader
Moving the pitch fader up or down will change the pitch percentage +/ - 12%.
9. Pitch Bend
Pushing the pitch bend buttons will automatically raise the pitch up to +12% or lower the pitch down to -12% from the
existing pitch setting. Releasing the buttons will return the pitch to the original pitch setting.
10. Jog Wheel
In search mode the jog wheel can be used to search forward or backwards in the music track, as well as for fine
adjustments to a cue point in pause mode. In pitch bend mode the jog wheel will function the same as the pitch bend
allowing you to speed up or slow down the music.
11. +10
Press the +10 button to scan through the track selection in increments of 10.
12. Track search
The track search buttons let you select the track to play.
13. Time / Single / PGM
Time
The time button switches the time display between three available sources, these three are time elapsed on the track,
total remain on the disc and remain on the track. Time elapsed indicates how much time has currently gone by since
the play button was pressed, time remaining on disc will count down the time remaining on the entire disc and time
remaining on track counts down the time that is left before the end of the track.
Single
Pressing the single button engages single mode, in this mode the PDX350 will play one song and then stop. pressing
the single button again will then activate continuous mode causing the unit to play continuously (after the last track, the
unit will return to the first track of the disc and continue to play).
PGM
Allows you to create a set playlist. To program a set list into the PDX350 memory, begin by stopping the unit from play
and pressing PGM to begin the set list. Select a track by using the track selection button to scan to the first track to be
placed in the set list. when you have selected the proper track press PGM and the PDX350 will be ready to set your
next selection. Repeat the previous steps until you have completed your play list, then press play to begin the set list.
4