DOREL Living DL8715 Manual Del Usuario página 6

5 PC DINING SET
DL8715
STEP 2
Place the table top (H) upside down on a on a soft, smooth surface.
Place the assembled frame upside down on top of the table top (H).
Center the frame on the table top by aligning the round tubing with the markings of the table
top (H) as shown below.
Secure the table top (H) to the assembled frame with screws (2) using a Phillips head
screwdriver (not included).
Adjust the assembled unit to ensure all surfaces are aligned and flush and tighten all the bolts
installed.
Turn the assembled table upright.
NOTE: Screws (2) will make their own holes. Do not use power tools and do not over tighten
screws.
Use these round
markings to align
the table frame.
The screws are
self-drilling and will
make their own
holes.