Remington RECHARGE FC2000 Manual De Instrucciones página 8

ENGLISH
• Press the button again for speed 2.
• Press the button again twice for speed 3.
, TIP: When changing brush heads, test each head on different speeds to
identify which is most comfortable for you.
6 Place the facial brush directly onto your skin.
7 Gently glide the brush over the skin and beard in circular motions avoiding
the delicate eye area Fig. 4. When you feel a pause, move to the next area.
, NOTE: Try to avoid applying too much pressure with the
brush when directly on the skin. If this happens the
brush will automatically stop its cycle and switch off.
This is perfectly normal and helps to ensure a
comfortable use. The facial brush can be restarted by
pressing the On switch.
• If you wish to end use before the full 60 seconds press
the On/Off button as per below:
• When using speed 1, press On/Off button 3 times.
• When using speed 2, press On/Off button twice.
• When using speed 3, press On/Off button once.
• When not in use, store the brush attachments with the
protective caps on Fig. 5.
• Ensure the bristles are dry before attaching the
protective cap.
C REPLACING THE BRUSH HEADS
, Removing the brush head:
• Hold the brush handle with one hand.
• With the other hand, gently pull the brush head upwards until it comes off
Fig. 6.
• To replace the brush head, gently push the head back on until you hear a
click Fig. 7.
8
Fig. 4
Fig. 5