How To Operate; Important - Homecraft HMCRCT135WH Manual De Instrucciones

HOW TO OPERATE

Safely Connecting The Power Supply
There are 3 differnt ways to safely connect the power supply cord to to an outlet.
1. Ground Socket
2. Rug over power cord
3. Slot Protector
Set Up Instructions
1. Remove all packaging and clean unit (Refer to CLEANING &
MAITANENCE PAGE 9) according to directions.
The unit should then be placed on a flat, dry surface. CAUTION: Leave at least 30 inches
2.
of open space in front, back, and sides of unit for proper ventilation. (Figure 1)
3. At this point attach adjustable feet. (Figure 2)
4. IMPORTANT: Before starting unit, allow unit to sit for
minimum of 2 hours before powering on.
5. After sitting for 2 or more hours the power cord can be connected to
the bottom of the unit and unit is ready for use. (Figure 3)
Figure 1
Figure 2
Figure 3
6